Desk Sputter and Carbon CoaterTurbo Pumped Desk Sputter and Carbon Coater
Sputter and carbon coater – DSCR is a compact coating system included both of sputter & carbon coater. The DSCR is able to sputter noble metals on the specimens and able to coat carbon film on the samples.
DSCR Desk Sputter and Carbon Coater
The DSCR desk SEM coater is a compact and powerful system designed for both sputtering noble metals (gold, palladium, platinum, and gold/palladium alloys) and thermal evaporation of carbon coatings. It is perfect for preparing non-conductive or poorly conductive specimens for electron microscopy imaging.
This rotary-pumped coater offers DC sputtering and carbon coating using either carbon fiber (thread) or carbon rods. The interchangeable heads make it a flexible, all-in-one solution for various coating applications.
Pulsed Carbon Fiber
Evaporation
The DSCR is able to perform pulsed carbon fiber evaporation. Short pulses provide more controlled deposition and significantly reduces the amount of debris associated with traditional carbon deposition.
Carbon Rod
Evaporation (Optional)
The DSCR could be equipped with carbon rod evaporator head (Optional). For this case an external 0-100 A high current power supply should be used instead of the internal high current power supply which is designed for carbon fiber evaporation.
Two-stage, direct drive rotary vane pump 6 m3/h
80 W DC switching power supply for sputtering
0-25 A pulsed DC power supply for carbon fiber evaporation
0-100 A DC power supply for carbon rod evaporation (Optional)
Quartz crystal thickness monitor with precision of 1 nm and resolution of 1 Å
One 2-inch magnetron cathode
Electronic venting valve
Sample rotation, height, and tilt adjustable
Planetary sample holder (Optional)
Electronic shutter
Easy-to-change specimen stages (Rotation stage as standard)
Two-year warranty
CE conformity
Intuitive touch screen to control the coating process and rapid data input
User friendly software, updatable via network
Precise control over coating rate to achieve finer grain structures
Semi-full automatic sputtering
Semi-full automatic carbon fiber/rod deposition process
Repeatable and programmable sputtering and carbon coating process in the automatic mode
Manual or automatic timed and thickness sputtering deposition
Records and plots coating parameters graphs
Storing coating recipes for repeatable depositions
Fine grain structural deposition of noble metals for SEM, FE-SEM, EDX, and TEM sample preparation
Conductive layers
GLAD sputtering
TEM grid plasma treatment for improved hydrophilicity (Optional)
Suitable for deposition of noble metals, carbon fiber, and rod (Optional)
170 mm OD x 140 mm H Pyrex cylinder chamber
Dimensions: 45 cm H x 50 cm W x 37 cm D
Ultimate vacuum: Less than 40 mTorr
Automatic control of the cathode’s temperature to protect the lifetime of the magnets
Rapid data input through fully automatic touch screen panel
Real-time plot of coating parameters
Deposition process data transfer to PC by USB port
Utilities: 220 V-110 V, 50/60 HZ – 1.7 kW
Shipping weight: 42 Kg
Head and external power supply for carbon rod evaporation
Quartz crystal sensor
Planetary sample rotation stage
Spare cylindrical vacuum glass chamber
Sputtering targets
Sealing gaskets
Plasma cleaner
Carbon fiber source
Newly Designed Sample Holder
A new 4-inch rotating sample holder with an optional gear offset is designed for the system to increase the deposition area and the number of coating stubs in a run (Customizable for max. 50×1 mm stubs).
DSCR Touch Screen
DSCR, the desk SEM coater, is equipped with a 7” colored touch screen panel and full automatic control using a user-friendly software to control and adjust the deposition process data. The vacuum and coating sequence information can be observed as digital data or curves on the touch screen. The last 300 coatings information is saved on the history page.
DCT Sample Holder
The DSCR can be equipped with different sample stage configurations depending on the user requirements. The standard sample stage is rotatable with adjustable height and angle and can be changed easily. The rotary planetary sample stage is a good choice for uniform coating of porous specimens (Optional).
Request a Quote!
Contact us today and our friendly support team will reach out as soon as possible.
VacTrade UK Products
The compact and user-friendly desktop coater machine offers adjustable coating thickness, variable speed control, and touchscreen display. Deliver professional-grade results with ease, handling a variety of media and coating materials. Investing in a desktop coater machine offers a cost-effective and efficient solution for higher-quality printing. Take your printing to new heights today!
