Desk Sputter Coater
The DST1-300 features a 300 mm chamber for uniform coatings of semiconductors, dielectrics, and metals. It supports 2, 3, or 4-inch water-cooled cathodes, ideal for large specimens (up to 15 cm) or multiple smaller samples.
Exceptional Sputtering Capabilities DST1-300
The DST1-300 allows unlimited sputtering time for thick layer deposition. It features a single magnetron target with a 600 W DC power supply or an optional 300 W RF power supply with an auto-matching box. This high-vacuum system supports a wide range of materials, including metals (e.g., Au, Pt/Pd, Ag, Cr, W, Ir), metal oxides (e.g., TiO₂, ZnO), and dielectrics, making it ideal for thin-film applications in micro/nanoelectronics and SEM sample preparation.
4″ magnetron option is also available.
The DST1-300
Range provides
The DST1-300 range provides the following versions to satisfy most laboratory applications.
- DST1-300 Single magnetron, DC, RF, sample Bias, sample heating, Sample rotation
- DST1-300 Single magnetron, DC, RF, sample Bias, sample heating, Sample rotation
- DST2-TA Two magnetrons angled central focal point, DC, RF sample Bias, sample heating, Sample rotation, single thermal evaporation facility for carbon, wire or boat.
- DST2-S Two magnetrons straight, DC, RF sample Bias, sample heating, Sample rotation, single thermal evaporation facility for carbon, wire or boat.
- DST2-TS Two magnetrons straight, DC, RF sample Bias, sample heating, Sample rotation, single thermal evaporation facility for carbon, wire or boat.
- DST3-A Three magnetrons angled central focal point, DC, RF sample Bias, sample heating, Sample rotation.
- DST3-S Three magnetrons straight, DC, RF sample Bias, sample heating, Sample rotation.
- DST3-TS Three magnetrons straight, DC, RF sample Bias, sample heating, Sample rotation, single thermal evaporation for carbon, wire or boat
- High vacuum turbo pump.
- Diaphragm backing pump.
- Full range vacuum gauge.
- High precision quartz crystal thickness monitor.
- Intuitive touch screen to control the coating process and rapid data input
- User friendly software that can be updated via network.
- Controls coating rate to achieve finer grain structures.
- Manual Timed and Thickness sputtering.
- Able to record and plot coating parameters graphs.
- Automated or semi-automated control.
- Equipped with electronic shutter.
- Easy-to-change specimen stages (rotation stage as standard).
- Two-year warranty.
- DST1-L, Turbo – Pumped Desktop Sputter Coater:
The large chamber Single magnetron water cooled desktop sputter coater model DST1-L is Vac Coats’ larger coating system having a separate control rack, with ability to coat semiconductors, dielectrics and metals (oxidizing and non-oxidizing). Uniform thin films with fine-grain sizes are formed in a fast cycle time. equipped with a single magnetron cathode with diameter of the cathode could be 2-4 inches depending on the requirement, RF, sample heating upgrades available.
DST2, Turbo – Pumped Desktop Dual Sputter Coater:
The large chamber Duel magnetron cathode, water-cooled, is ideally suitable for coating large specimens with diameters of up to 15 cm, or multiple smaller specimens over a similar diameter. The unlimited sputtering time makes it suitable for deposition of thick layer. The system is equipped with 800 W DC power supplies, 300 W RF power supply (optional) with matching box. The system can deposit wide ranges of materials on different surfaces for thin film applications such as Micro & Nano electronic and SEM sample preparation.
DST3: Turbo – Pumped Desktop triple Sputter Coater:
The large chamber DST3 3 2” magnetron cathodes, water-cooled, is ideally suitable for coating large specimens with diameters of up to 15 cm, or multiple smaller specimens over a similar diameter. The unlimited sputtering time makes it suitable for deposition of thick layer. The system is equipped with 800 W DC power supplies, 300 W RF power supply (optional) with matching box. The system can deposit wide ranges of materials on different surfaces for thin film applications such as Micro & Nano electronic and SEM sample preparation
High-vacuum level with built-in turbo pump (Leybold)
Pumping Speed | 90 l/s | 350 l/s |
Ultimate Pressure | 8×10-6 | 8×10-7 |
Suitable for deposition of a wide range of materials
300 mm OD × 210 mm H vacuum chamber
Dimensions: 580 × 500 × 630 mm (H × W × D)
Precise control over the sputtering rate to achieve finer grain structure
Automatic control of the deposition power independent of pressure
Automatic control of the cathode’s temperature to protect the lifetime of the magnets
Rapid data input through fully automatic touch screen panel
Real-time plots of coating parameters
Deposition process data transfer to PC by a USB port
Utilities: 220 V-110 V, 50/60 HZ – 2 kW
Shipping weight: 50 kg
The Desk Sputter and Carbon Coater has the following options and accessories:
Carbon rod evaporation head
High current power supply for carbon rod
Quartz crystal sensor
Planetary sample rotation
Spare glass vacuum chamber
Sputtering Targets
Carbon fiber
Sealing gaskets
Research-Grade Sputter Coater
DST1-300
The DST1-300 is designed for research applications and SEM sample preparation, delivering high-quality, uniform films with fine grain sizes. It is ideal for specimens requiring high-resolution characterization, including FE-SEM, EDS/WDS, TEM, and EBSD analysis.
Clean Vacuum of
DST1-300
The DST1-300 features a cylindrical Pyrex vacuum chamber, a 90 L/s turbomolecular pump, and a 6 m³/h two-stage rotary vane pump. This setup ensures a clean vacuum environment, free from the oil contamination common with diffusion pumps.
Sample Holder
DST1-300
The DST1-300 features rotatable sample holder stages with adjustable height and angle. The standard holder is easy to change, ensuring flexibility for various sample requirements.
Touch Screen Control
The DST1-300 is equipped with a 7” colored touch screen and full automatic control using a user-friendly software to control and adjust the deposition process data. The vacuum and coating sequence information can be observed as digital data or curves on the touch screen. The last 300 coatings information is saved on the history page.
Request a Quote!
Contact us today and our friendly support team will reach out as soon as possible.
VacTrade UK Products
The compact and user-friendly desktop coater machine offers adjustable coating thickness, variable speed control, and touchscreen display. Deliver professional-grade results with ease, handling a variety of media and coating materials. Investing in a desktop coater machine offers a cost-effective and efficient solution for higher-quality printing. Take your printing to new heights today!
